
Inverter
“Inverter “is type of emergency power back up. Inverter provides electrical energy in the absence of power from power providing utility. Batteries are the power source through which inverters converts chemical energy into an electrical energy. Batteries produces DC power. Inverter take that DC power and convert that DC power into an AC power through digital circuitry.
Since inverters are the emergency power source, Inverter tripping is a serious concern. Which can not be neglected at any cost.
In this post, We are going to discuss the reasons of inverter tripping. Further, We will also discuss solution and preventive action form the inverter tripping.
Causes of frequent inverter tripping
| Causes of frequency inverter tripping | Remarks |
| 1. Low Battery/ Low battery voltage | Inverters do not work when battery voltage get low. Inverter produces the trip in condition of low battery |
| 2. Short Circuit | |
| 3. Overload | |
| 4. Loose connection | Loose connection causes voltage drop, localized heating, Arcing and sparking, Intermittent power supply |
| 5. Damaged/Faulty Battery | Damaged or faulty battery results in low voltage. |
| 6. Faulty Inverter | |
| 7.Wrong water addition in battery instead of DM water(lead acid batteries only not for lithium ion battery and gel based electrolyte battery ) | Wrong water or solution addition in battery leads to degradation of the battery |
| 8.Overheating, Poor ventilation and excessive ambient temperature | |
| 9. Faulty input supply |
Solution
Solution of inverter tripping is only be done after rectifying the fault and its cause. Next, Fault type, Its cause and solution are discussed all together.
Fault tracing, Causes and their solution should be done by qualified person only.
| Fault | Cause | Solution |
| Low battery | 1. Inverter charging system not working 2. Low battery water level 3. Loose, corroded or broken connection 4. Faulty Battery 5. Faulty inverter | 1. Repair or replace the inverter 2. Fill with DM water 3. Check all the connections make them tight and clean or repair the broken wire or connection. 4. Replace the battery 5. Repair or replace the inverter |
| Overload | 1. Extra load connection 2. Faulty connected load | 1. Remove the extra load and connect only the most important ones. 2. Remove the faulty load |
| Overheat or high temperature | 1. Direct sunlight 2. Improper ventilation | 1. Place the inverter in shed away from direct sunlight. 2. Placed area should be well ventilated. |
| Low inverter input voltage | 1. Loose connection at input side of inverter. 2. Loose connection at distribution side; input circuit of inverter ! 3. Input voltage very much low. | 1. Check and tight all the input connection at inverter 2. Check and tight all the connection of input circuit of inverter. 3. Place a voltage stabilizer or correction required from power providers. |
| Short circuit | 1. Wrong connections 2. Faulty load | 1. Cross verify the connection 2. Detect the faulty load and eliminate that load.(Detection will be quick if distribution is right) |
| Low output voltage | 1. Loose or corroded connection. 2. Control card is faulty. 3. improper neutral connection | 1. Check, Clean and tight all the connections 2. Card replacement or inverter replacement. 3. Trace the neutral. |
| No output voltage | 1. Blown fuse 2. Neutral broken 3. Inverter is faulty 4. Battery is dead or faulty 5. Input power supply not working | 1. Check the connected load and replace the fuse. 2. Repair or change the broken neutral wire 3. Inverter repair or inverter replacement 4. Top up battery or replace the battery. 5. Check for input power supply. |
Preventive actions from Inverter trip
- Battery date of installation should be marked in-front of the battery. So that Warranty period easily get monitored.
- Monitor Batteries; water level indicator at regular interval. or some other alternative batteries are used such as lithium ion or gel based lead acid battery.
- Appropriate distribution. Right selection of circuit breaker for inverter distribution.
- Monitor the terminal connections and tightness of battery bolts at regular intervals.
- Batteries and inverter should be placed in dark and well ventilated area
- Batteries lifting trolley should be adequate; Such that batteries proper weight get distributed around the stand.
- Inverter loading should not be more than 80%
- DOD (depth of discharge). Batteries should not be consumed at extreme.
- Cleaning the total terminal at regular intervals.
How can you increase the battery life ?
- Maintaining the Battery water level
- Cleaning of Battery terminals
- Monitoring the Battery conditions
- Loading should be below 80%. Or we Should strictly follow the guidelines and instruction of manufacturer.
- Proper Ventilation for battery and inverter
When should you check your battery ?
- When Battery get swollen, damaged or leaked
- Battery Taking longer time for charging
- Battery fast drain
- Battery getting heated up
- Heavy corrosion across the battery, Its terminals and cell breathing holes
Factors that affect the life of battery !
- Frequency of power cuts
- Depth of discharge
- Proper charging
- Water level maintenance
- Load on battery
- quality of battery
- Life of battery
- temperature conditions
Frequently Asked Questions related to inverters
1. Why does my inverter trip frequently?
An inverter may trip frequently due to battery low voltage, overload, loose battery connections, overheating, faulty wiring, or an internal inverter fault. Identifying the warning indication or error code can help determine the actual cause.
2. Why does my inverter trip when the electricity supply goes off?
When the mains supply fails, the inverter takes over the connected load. If the connected load exceeds its rated capacity or the battery voltage drops below the minimum operating limit, the inverter may trip.
3. Can a faulty battery cause an inverter to trip?
Yes. A weak or damaged battery may experience a significant voltage drop when a load is connected. If the battery voltage falls below the inverter’s low-voltage protection limit, the inverter may shut down.
4. Why does my inverter trip even when the battery is fully charged?
A fully charged battery does not always guarantee proper performance. Battery deterioration, loose connections, excessive load, overheating, or an internal inverter fault can cause frequent tripping.
5. Can loose battery connections cause inverter tripping?
Yes. Loose or corroded battery terminals increase contact resistance, resulting in voltage drops and localized heating. This can cause unstable inverter operation or low-voltage protection.
6. Why does my inverter trip when I switch on a heavy appliance?
Heavy appliances such as refrigerators, pumps, and air conditioners can draw high starting current. This temporary current surge may exceed the inverter’s overload capacity and activate its protection system.
7. Why does my inverter trip due to overheating?
Poor ventilation, excessive loading, blocked cooling vents, or a faulty cooling fan can increase the inverter’s internal temperature. The thermal protection system may shut down the inverter to prevent damage.
8. How do I know whether my inverter battery is faulty?
Common signs include reduced backup time, excessive voltage drop under load, slow charging, abnormal heating, and frequent low-battery warnings. A proper battery test can confirm its condition.
9. Can an undersized inverter cause frequent tripping?
Yes. If the connected load exceeds the inverter’s rated capacity, its overload protection may activate. Selecting an inverter according to the total running load and starting requirements of connected appliances helps prevent this problem.
10. How can I prevent my inverter from tripping frequently?
Avoid overloading the inverter, maintain proper battery connections, ensure adequate ventilation, use the recommended battery type, maintain serviceable batteries correctly, and arrange periodic inspection.
